Zigbee Locks via Matter in Home Assistant

[fangping.guo]

I've added your gateway device to a whitelist for upgrading to a new version. You can upgrade it and then verify the doorlock device bridging situation.

[RebelMagpie]

Thank you! I have upgraded the hub device and rebooted. No change in behaviour of the locks. I can unlock them using Matter, but locking them times out after 30 seconds, as it did before.

Do I need to do anything at the lock?

[fangping.guo]

Could you please unbind and then re-bind the door lock for verification? After that, please send the new device ID and gateway ID. I hope to verify that it has obtained the correct conversion file.

[RebelMagpie]

Have removed and re-added. No change.

Lock Device ID bfe5eae7f1585756c8lxxg
Gateway ID bf8d9d92318c34b022d6qh

[RebelMagpie]

Also removed and re-added one of my other locks. Same result.

Device ID bf54c1fb3033c3a86bo843

[faustino]

I have 4 Tuya zigbee locks

• 3x deadlocks, ID: bf17b2f494f86f27a86y53
  e.g.https://a.aliexpress.com/_mNoDiXN

• 1x mortice lock with handle, ID: bf2379caed03ea0c6fygsz
  e.g. https://a.aliexpress.com/_mNByxar

All connected to a Zemismart M1 Matter hub, ID: bf8d9d92318c34b022d6qh.

All 4 locks show up in Home Assistant via the Matter integration, and I can see the lock state correctly.

However, only the mortice lock allows me to control the lock from Home Assistant. I can unlock and lock the mortice lock directly from the Matter device entity in Home Assistant.

The 3 deadlocks show their status (locked/unlocked) in Home Assistant, but if I try to control them, they show "Unlocking" (or "Locking") for about a minute before reverting to the original state. Nothing happens at the lock

I would like to be able to control all the locks from within Home Assistant. Are you able to help?

Hi RebelMagpie, may I know if the matter hub has the data of which user unlocks the door? For example admin 1 unlocks the door via the fingerprint. Or user 2 unlocks the door via the fingerprint. This function is available in tuya app, but not sure if its available via matter hub currently

[RebelMagpie]

Yes, it does. The "Records" tab in the lock entity shows which fingerprint or passcode operated it.

[faustino]

Wow that's amazing. So basically with this matter hub, even if there is no internet, everything will still be working for 3 of your locks? I am putting an order now

[RebelMagpie]

Apologies, that's in the Tuya app, not Home Assistant

[faustino]

Oh, so there is no way for Home Assistant to know which user unlocks the door lock without internet at the moment?