Tasmota - 4 relay board

[Vamp]

Hello there,

I Install Tasmota a 4 relay board: https://lilygo.cc/products/t-relay?srsl ... Sjrk_g77zY

i set it up that it provide the relays with matter:

I able to add it to Tuya Matter Gateway (Moes) but not see anything. It only say taht not supported device. Here the Virtual device ID: bfb5a01u2decxzbw

[qiusui]

Hi Vamp,

I have received your feedback, but I can't solve your problem, I will ask other colleagues to deal with it, please wait patiently.

[huangxh]

Hello there,

I Install Tasmota a 4 relay board: https://lilygo.cc/products/t-relay?srsl ... Sjrk_g77zY

i set it up that it provide the relays with matter:

I able to add it to Tuya Matter Gateway (Moes) but not see anything. It only say taht not supported device. Here the Virtual device ID: bfb5a01u2decxzbw

Based on the current situation, we do not support this category of devices. Could you please let us know what type of device you have? thanks!

[Vamp]

@huangxh

I use these board: https://lilygo.cc/products/t-relay?srsl ... Sjrk_g77zY

I install Tasmota frimware, that provide matter support. Now i set it up really basicly, only 4 relay output.

It possible that help you: https://tasmota.github.io/docs/Matter-Internals/

[huangxh]

I advise you to update the Tuya app to version 6.5.0, then try it again.
thanks

[Vamp]

I advise you to update the Tuya app to version 6.5.0, then try it again.
thanks

Thanks a lot! It working like a charm! big step these the DiY and Tuya integration!

[Vamp]

Further investigation:

The control are working but i can not able to make automation based these devices. The automation are not running.

The IDs:

W20-UBEA 3 bf1d431ff67c6d74a2cqth
W20-UBEA 2 bf3bef01e627f9caf5ib0v
W20-UBEA bf5d5a17f1378ad2d3w3j3
W20-UBEA 4 bf73bdd2461fc1efaapyzz
Matter网关兜底 bf87f9v7n3diubs4

Edit:

and only work if the app are same Wifi with the matter device.

[huangxh]

Further investigation:

The control are working but i can not able to make automation based these devices. The automation are not running.

The IDs:

W20-UBEA 3 bf1d431ff67c6d74a2cqth
W20-UBEA 2 bf3bef01e627f9caf5ib0v
W20-UBEA bf5d5a17f1378ad2d3w3j3
W20-UBEA 4 bf73bdd2461fc1efaapyzz
Matter网关兜底 bf87f9v7n3diubs4

Edit:

and only work if the app are same Wifi with the matter device.

Thank you for your feedback. If you want to control these devices from an external network, you will need a Tuya gateway.

[Yocee84]

Please check this device too!

bf5510932bd20c41dbyimd

Athom Plug V3 Tasmota with matter.

[huangxh]

Please check this device too!

bf5510932bd20c41dbyimd

Athom Plug V3 Tasmota with matter.

I have noticed that you can control the device with the on/off function, but the device does not report back. Do you have a gateway? You could add a gateway and then test it.
thanks