你好，我在用ztu模组（TLSR8258_TuyaOS-3.11.1）开发6路开关的时候，app端点击设置里面的 背光开关，上电状态，指示灯状态 设备端没有收到指令，请问需要怎么配置cluster ，以及是否还有别的地方需要修改
#define ONOFF_ATTR_LIST1 \
{0x0000, ATTR_BOOLEAN_ATTRIBUTE_TYPE, 1, (ATTR_MASK_READABLE), 0, {(UINT8_T )0x00}}, / 20 / On/off / OnOff*/ \
{0x01, ATTR_BOOLEAN_ATTRIBUTE_TYPE, 1, (ATTR_MASK_TOKEN_FAST | ATTR_MASK_READABLE), 0, {(UINT8_T )0x01}}, / 指示灯状态设置（涂鸦私有属性）*/ \
{0x02, ATTR_BOOLEAN_ATTRIBUTE_TYPE, 1, (ATTR_MASK_TOKEN_FAST | ATTR_MASK_READABLE), 0, {(UINT8_T )0x01}}, / 上电状态设置-总控（涂鸦私有属性）*/ \
{0x4001, ATTR_DATA16_ATTRIBUTE_TYPE, 2, (ATTR_MASK_TOKEN_FAST | ATTR_MASK_READABLE), 0, {(UINT8_T )0x0000}}, / 20 / On/off / OnOff*/ \
{0x4002, ATTR_DATA16_ATTRIBUTE_TYPE, 2, (ATTR_MASK_TOKEN_FAST | ATTR_MASK_READABLE), 0, {(UINT8_T )0x0000}}, / OffWaitTime*/ \
{0x8001, ATTR_ENUM8_ATTRIBUTE_TYPE, 1, (ATTR_MASK_READABLE), 0, {(UINT8_T )0x01}}, / 指示灯状态设置（涂鸦私有属性）*/ \
{0x8002, ATTR_ENUM8_ATTRIBUTE_TYPE, 1, (ATTR_MASK_READABLE), 0, {(UINT8_T )0x01}}, / 上电状态设置-总控（涂鸦私有属性）*/ \
{0x5000, ATTR_BOOLEAN_ATTRIBUTE_TYPE, 1, (ATTR_MASK_READABLE), 0, {(UINT8_T )0x01}}, / 20 / back light*/ \
{0xFFFD, ATTR_INT16U_ATTRIBUTE_TYPE, 2, (ATTR_MASK_READABLE), 0, {(UINT8_T )0x0002}}, / 24 / On/off / cluster revision*/
